2

# How to use DCF, NPV and ROI

Hi all,

I have a few questions about NPV and DCF:

1- Where would you use one or the other? Investment cases / Valuation cases
2- When you use ROI in lets say an investment case, would you use the result of DCF, NPV, or neither?

Thanks a lot

Hi all,

I have a few questions about NPV and DCF:

1- Where would you use one or the other? Investment cases / Valuation cases
2- When you use ROI in lets say an investment case, would you use the result of DCF, NPV, or neither?

Thanks a lot

• Date ascending
• Date descending

NPV= Net Present Value- [-investment +( Summation of FCF/(1+wacc)^t from 1 to t)].This is a basic formula, it is way more involved than the substituting numbers in the formula, typical you would need to create a DCF model based on a pro forma to get the FCF and terminal value. We could spend hours discussing adjustments, discount rate calculation (WAAC or APV), growth rates, and terminal valve assumptions etc. but for a case situation, the intuition and application of the formula rather than the development of the model would be required.

In short, NPV of a deal is today's value of all future streaming of free cash flow generated from the deal in question. If it’s above 0 or positive then you should do the project, if below 0 or negative, then you shouldn't do the project.

So all you need in essences is FCF and the Discount rate or WACC and the time horizon to evaluate.

P.S- Clarify with the interview the approach and formula you plan to use, as well as the assumptions.

On the other hand, ROI is simply (N.I/Investment) this doesn't take discount rate or WACC into account, which makes it inferior to NPV, You could call ROI a payback estimator (inverse of ROI= Payback) that doesn't take risk, inflation and opportunity cost into account. ROI is a quick and dirty estimate to sniff test the deal.

For instance, If payback time requested by your client is 2 years and your ROI/payback analysis yields 20% or 5years then you can almost be certain its not a +NPV project and should be cautious about making the deal, else other strategic reasons support doing so. For example, accepting the deal because it’s serves as a structural barrier to deter entry by competition etc.

NPV= Net Present Value- [-investment +( Summation of FCF/(1+wacc)^t from 1 to t)].This is a basic formula, it is way more involved than the substituting numbers in the formula, typical you would need to create a DCF model based on a pro forma to get the FCF and terminal value. We could spend hours discussing adjustments, discount rate calculation (WAAC or APV), growth rates, and terminal valve assumptions etc. but for a case situation, the intuition and application of the formula rather than the development of the model would be required.

In short, NPV of a deal is today's value of all future streaming of free cash flow generated from the deal in question. If it’s above 0 or positive then you should do the project, if below 0 or negative, then you shouldn't do the project.

So all you need in essences is FCF and the Discount rate or WACC and the time horizon to evaluate.

P.S- Clarify with the interview the approach and formula you plan to use, as well as the assumptions.

On the other hand, ROI is simply (N.I/Investment) this doesn't take discount rate or WACC into account, which makes it inferior to NPV, You could call ROI a payback estimator (inverse of ROI= Payback) that doesn't take risk, inflation and opportunity cost into account. ROI is a quick and dirty estimate to sniff test the deal.

For instance, If payback time requested by your client is 2 years and your ROI/payback analysis yields 20% or 5years then you can almost be certain its not a +NPV project and should be cautious about making the deal, else other strategic reasons support doing so. For example, accepting the deal because it’s serves as a structural barrier to deter entry by competition etc.

NPV and ROI can be used interchangeably. But when standard or industry standard interest rate is given, ROI is calculated and compared with standard interest. Otherwise, in general NPV is calculated and compared between two options.

NPV and ROI can be used interchangeably. But when standard or industry standard interest rate is given, ROI is calculated and compared with standard interest. Otherwise, in general NPV is calculated and compared between two options.

(edited)

## Related BootCamp article(s)

### Valuation

Valuation case studies require you to estimate how much a firm, patent, or service is worth. For these cases, use the Discounted Cash Flow method or the Industry multiple method.

### Net Present Value - NPV

Use the Net Present Value (NPV) to compare investments with different volatile cash-flows over time and quantitatively assess their attractiveness.

## Related case(s)

### innogy Case: Smart Meters

Solved 25.2k times
innogy Case: Smart Meters The municipal utility Hamburg Energized is a local energy retail (power and gas) and distribution grid company active in the city of Hamburg. The majority of shares of Hamburg Energized is held by the city itself. As the distribution system operator of Hamburg, Hamburg Energized is responsible for the operations and maintenance of the gas and electricity grid on customer level. In the course of the energy transition in Germany, the responsible board member for the technical grid operations, Jan Bremer, thinks about deploying Smart Meters in the gas and electricity grid. He approaches you with the request to conduct a feasibility analysis and to give a clear recommendation whether or not Hamburg Energized should use Smart Meters in its gas and electricity grid in the future.
| Rating: (4.4 / 5.0)

The municipal utility Hamburg Energized is a local energy retail (power and gas) and distribution grid company active in the city of Hamburg. The majority of shares of Hamburg Energized is held by the city itself. As the distribution system operator of Hamburg, Hamburg Energized is responsible for t ... Open whole case

### PE Portfolio Strategy

Solved 5.1k times
PE Portfolio Strategy We are a private equity firm operating primarily in the automotive industry. We would like you to figure out whether we should increase our portfolio in the sensor market or not. We would like you to do a profit/margin growth potential analysis and tell us how we can add value to this company given the other companies in our portfolio.
| Rating: (4.0 / 5.0)

We are a private equity firm operating primarily in the automotive industry. We would like you to figure out whether we should increase our portfolio in the sensor market or not. We would like you to do a profit/margin growth potential analysis and tell us how we can add value to this company given ... Open whole case