## Kommentare

Since this is a **candidate-led** case, the candidate should drive the case from start to finish.

- Information about RFID technology will be provided to candidate if required
- Knowledge on the RFID technology will not be assessed, transfer of (given) knowledge is expected.

## Kurzlösung

By implementing RFID the entire **lending process** of a book can be significantly **streamlined**. The working time **savings** sum up to almost **1 FTE** per year at an even **better customer experience**. Thus the implementation of RFID can be **highly recommended**.

## Detaillierte Lösung

Paragraphs highlighted in green indicate diagrams or tables that can be shared in the “Case exhibits” section.

Paragraphs highlighted in blue can be verbally communicated to the interviewee.

Paragraphs highlighted in orange indicate hints for you how to guide the interviewee through the case.

The following framework/structure provides an overview of the case:

Feel free to share **Figure 1** with a best-practice approach if the interviewee seems to be stuck or lost.

### I. First analysis of RFID potential

In this phase the candidate should come up with the following deliverables

- Overall structure for following analysis
- Identified need and potential of RFID technology, including key benefits and main risks
- First assessment of RFID idea

Ask the candidate whether she is familiar with the RFID technology. If yes, let her explain the **key characteristics**. Otherwise you can provide the following additional information.

- Radio-frequency identification (RFID) is the use of an electronic chip (RFID tag) applied to e.g. a product in order to identify and track it using radio waves
- Latter is done by a RFID scanner
- RFID tags can be scanned over a wide range (~7 meters)
- RFID tags can be scanned in bulk

Based on this **high-level knowledge** about RFID the interviewee should be able to assess its potential. Let the interviewee suggest a framework/ structure to do this assessment.

If the candidate does not come up with a framework by herself these are generally good frameworks for such problems:

- Cost-benefit analysis
- SWOT
- 4Cs

Let the interviewee conduct a SWOT analysis to assess the implementation of RFID.

Share **Figure 2** with a possible SWOT analysis with the interviewee.

The interviewee should infer from the SWOT analysis that there are strong arguments on the **benefits** side. Therefore RFID seems to be quite promising and its worth to have a closer look at it.

It is important that this first step ends with a clear hypothesis stating whether the implementation of RFID is beneficial for the library or not. If the interviewee does not take a clear view on it she is not applying an **answer-first approach**.

### II. Understanding of as-is situation

In this phase the candidate should come up with the following deliverables

Let the interviewee ask relevant questions regarding the current as-is situation.

You can provide the following information:

Current system:

- Barcode, each book scanned manually by employee for lending/ return

RFID pilot offer:

- 2 tiers: bulk checkout process conducted by employee (all books scanned at once) + automatic return process (for non opening hours)
- Financial aspects of investment negligible (covered mostly by governmental ministry)

Library:

- 4 employees, working 8h a day
- Media, mainly books: 900,000 books
- 20,000 students, 1,000 faculties, 100,000 inhabitants of city

Ideally the interviewee lays out the typical lending process of a book in a library first to gain full transparency.

Share Figure 3 showing the lending process with the interviewee.

As a second step the interviewee can indicate which process steps are affected by RFID. Let her then calculate the potential **time savings** coming from the new RFID system (for the employees) to quantify the benefits.

Reminder:

RFID system offers

- bulk lending/return process conducted by employee
- automatic return process (for non opening hours)

Time savings are possible at

- the lending step (user comes to checkout, books to be scanned) and
- the return step (... same procedure)

### III. Calculation of saved process time

In this phase the candidate should come up with the following deliverables

- Description of lending process
- Based on realistic assumptions, calculation of difference between barcode and RFID systems for major processes

To quantify the benefits of RFID the interview should calculate the process time of the current lending process using traditional barcodes and compare it with the process time of the lending process using RFID. The gap is the potential benefit or loss respectively.

#### Current process using barcodes:

Checkout process conducted by employee: Take one (next) book ->

open it -> scan it -> close it -> put it away

Based on this process chain it is reasonable to assume 10 sec **per book** for the checkout. To derive the total time demand for the checkout process in an entire library the interviewee needs to estimate how many books are borrowed per year. The number of books borrowed multiplied with the checkout time per book results in the total time demand.

Key question: How many books are borrowed per year?

Who borrows books?

- Students (20,000)
- Faculty (1,000)
- Inhabitants of city (100,000)

Detailed computation for **students**:

- 8 courses per semester per student
- per course, 2 books borrowed on average
- Books borrowed by students per year = (8*2 + 8*2) * 20,000 = 640,000

Detailed computation for **faculty **(simplified assumption):

- 20 books per faculty per year
- Books borrowed by faculty per year = 20*1,000 = 20,000

Detailed computation **inhabitants** (simplified assumption):

- 2 books per inhabitant per year
- Books borrowed by inhabitants per year = 100,000 * 2 = 200,000

**Total number** of borrowed books per year:

= 200,000 + 20,000 + 640,000 = 860,000

**Total duration of process** on yearly basis:

= 860,000 books * 10sec = 8,600,000sec

= 143,333min = 2,388h = 298.5 FTE days (assumption: 8h working time/day)

Auxiliary calculation FTE days per year:

365 days - 52*2 weekend days - 30 vacation days - 10 public holidays = 221 FTE days / year and FTE

Calculated in FTE (Full-time employees) you need **1.35 FTE** (298.5/ 221) to carry out the checkout process throughout the year. To finally evaluate this workload we need to determine how many FTE are needed for a new process using RFID technology.

#### New process using RFID:

New checkout process conducted by employee: Take all books -> put under scanner -> scan all at once -> put books away

Since this process is quite similar to how it was before it is reasonable to assume also 10 sec time demand **per borrower**. Not much has changed except the fact that a bulk of books can be scanned at once instead of scanning every single book. However, this slight process difference leads to a significant time benefit.

To derive the total time demand for the new checkout process the interviewee needs to estimate how many borrowers show up in the library per year. The number of customers (borrowers) multiplied with the checkout time per borrower results in the total time demand.

Key question: How many borrowers per year?

Who borrows books?

- Students (20,000)
- Faculty (1,000)
- Inhabitants of city (100,000)

Detailed computation for students :

- Ceteris paribus assumptions of barcode computation
- Books borrowed by students per year = (8*2 + 8*2) * 20,000 = 640,000
- Each time a student borrows 4 books at once when she goes to the library (assumption)
- Borrower per year from students = 640,000 / 4 = 160,000

The interviewee could doublecheck this by evaluating whether the implicitly assumed number of library visits per student is plausible or not. In this case the implicity assumed number of library visits is 160,000 / 20,000 (#students) = 8 per year. This sounds reasonable.

Detailed computation for faculty (simplified):

- 4 library visits per faculty per year
- Borrower per year from faculty =4 * 1,000 = 4,000

Detailed computation inhabitants (simplified assumption):

- 2 library visits per inhabitant per year
- Borrower per year from inhabitants: 100,000 * 2 = 200,000

**Total number of borrowers** books per year:

= 160,000 + 4,000 + 200,000 = 364,000

**Total duration of process** on yearly basis:

= 364,000 borrowers * 10sec = 3,640,000sec

= 60,666min = 1,011h = 126.5 FTE days (assumptions c.p.)

Calculated in FTE (Full-time employees) you need **0.57**** FTE** to carry out this new checkout process throughout the year.

### IV. Recommendation incl. reasoning

In this phase the candidate should come up with the following deliverables

Based on the pure time savings it is **highly recommended **to switch to RFID. The library can save almost one entire FTE which equals ~30,000 EUR per year in **savings** (assumed salary: 30,000 EUR + social insurance). In addition it is highly likely that the perceived **service quality** will be better at the same time; e.g. due to possible returns during non-opening hours (as indicated in the SWOT analysis).

## Schwierige Fragen

How would your recommendation change, if the investment is not covered by the Ministry of Education?

If you would transfer your gained knowledge of RIFD to the world of DHL and think about applying RFID at a warehouse:

How would a implementation process for this technology typically like?

Which teething problems could you think of the logistics environment?

###